Preceramic polymer‐derived SiOC fibers by electrospinning

Silicon oxycarbide (SiOC) fibers with different chemical compositions were successfully fabricated by electrospinning a mixture of polyvinylpyrrolidone (PVP) and commercially available polymethylsilsesquioxane (MK) or polymethylphenylsilsesquioxane (H44) preceramic polymers, followed by cross‐linking and pyrolysis at 1000°C in Argon. The influence of the processing procedure (solvent selection, cross‐linking catalyst and additives) on the morphology of the produced fibers was investigated. For the MK/isopropanol system, the introduction of 20 vol% N,N‐dimethylformamide (DMF) enabled to decrease the diameter of the as‐spun fibers from 2.72 ± 0.12 μm to 1.65 ± 0.09 μm. For the H44/DMF systems, beads‐free fibers were obtained by adding 50 vol% choloroform. After pyrolysis, the resultant SiOC fibers derived from MK and H44 resins possessed uniform morphology, with an average diameter of 0.97 ± 0.07 μm and 1.07 ± 0.08 μm, respectively. Due to their different chemical compositions, the MK‐derived and H44‐derived SiOC ceramic fibers could find different potential applications. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39836.     

Isothermal and non‐isothermal crystallization of poly(L‐lactic acid)/poly(butylene terephthalate) blends

Isothermal and non‐isothermal crystallization kinetics of poly(l ‐lactic acid)/poly(butylene terephthalate) (PLLA/PBT) blends containing PLLA as major component is detailed in this contribution. PLLA and PBT are not miscible, but compatibility of the polymer pair is ensured by interactions between the functional groups of the two polyesters, established upon melt mixing. Crystal polymorphism of the two polyesters is not influenced by blending, as probed by wide‐angle X‐ray analysis. The addition of PLLA does not affect the temperature range of crystallization kinetics of PBT, nor the crystallinity level attained when the blends are cooled from the melt at constant rate. Conversely, PBT favors crystallization of the biodegradable polyester. The addition of PBT results in an anticipated onset of crystallization of PLLA during cooling at a fixed rate, with a sizeable enhancement of the crystal fraction. Isothermal crystallization analysis confirmed the faster crystallization rate of PLLA in the presence of PBT. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40372.     

Interactive constrained dynamics for rigid and deformable objects

Following the continuous increase in computational power of consumer hardware, interactive virtual environments have been recently enriched with more and more complex deformable objects. However, many physics engines are still very limited in the way they handle interacting rigid and deformable objects. This paper proposes a constraint‐based approach to real‐time simulation of coupled rigid and deformable objects capable of providing two‐way interactions. Similar techniques have seen widespread usage for either rigid or deformable objects, but not for the simultaneous simulation of both. By extending such approaches, we show not only how interaction is possible but also how it can be performed at real‐time rates. We address contact response and also show how to implement typical constraints to enforce limitations in the degrees of freedom and to enhance the dynamical properties of deformable objects. The method is easily integrated into existing physics engines that use similar constraint solvers and is independent on the kind of deformable object paradigm chosen. The provided simulation results show that the method is fast and effective in handling contacts between rigid and deformable objects and in simulating friction and other kinds of constraints. Copyright © 2015 John Wiley & Sons, Ltd.     

Integrating a Human Behavior Model within an Agent‐Based Approach for Blasting Evacuation

Several studies on Emergency Management are available in the literature, but most of them do not consider how the human behavior during an emergency can affect the evacuation process. Therefore, the novel contribution of this article is the implementation of an agent‐based model to describe the evacuation, due to a blast in a public area, integrated with a human behavior analytical model. Each agent has its own behavior that is described in a layered framework. The first layer simulates the “agent's features” function. Then, an “individual module” describes dynamically the emotional aspects using (i) the Decision Field Theory, (ii) a stationary stochastic model, and (iii) the results coming from a questionnaire. An agent‐based model with integrated human behavior is proposed to test critical infrastructures in emergency conditions without performing full scale evacuation tests. Analyses could be performed both in real time with a hazard scenario and at the design level to predict the system response to identify the optimal configuration. Therefore, the development of the proposed methodology could support both designers and policy makers in the decision‐making process.     

Diatomite silica nanoparticles for drug delivery

Diatomite is a natural fossil material of sedimentary origin, constituted by fragments of diatom siliceous skeletons. In this preliminary work, the properties of diatomite nanoparticles as potential system for the delivery of drugs in cancer cells were exploited. A purification procedure, based on thermal treatments in strong acid solutions, was used to remove inorganic and organic impurities from diatomite and to make them a safe material for medical applications. The micrometric diatomite powder was reduced in nanoparticles by mechanical crushing, sonication, and filtering. Morphological analysis performed by dynamic light scattering and transmission electron microscopy reveals a particles size included between 100 and 300 nm. Diatomite nanoparticles were functionalized by 3-aminopropyltriethoxysilane and labeled by tetramethylrhodamine isothiocyanate. Different concentrations of chemically modified nanoparticles were incubated with cancer cells and confocal microscopy was performed. Imaging analysis showed an efficient cellular uptake and homogeneous distribution of nanoparticles in cytoplasm and nucleus, thus suggesting their potentiality as nanocarriers for drug delivery.

PACS

87.85.J81.05.Rm; 61.46. + w     

Positron Emitting Magnetic Nanoconstructs for PET/MR Imaging

Hybrid PET/MRI scanners have the potential to provide fundamental molecular, cellular, and anatomic information essential for optimizing therapeutic and surgical interventions. However, their full utilization is currently limited by the lack of truly multi‐modal contrast agents capable of exploiting the strengths of each modality. Here, we report on the development of long‐circulating positron‐emitting magnetic nanoconstructs (PEM) designed to image solid tumors for combined PET/MRI. PEMs are synthesized by a modified nano‐precipitation method mixing poly(lactic‐co‐glycolic acid) (PLGA), lipids, and polyethylene glycol (PEG) chains with 5 nm iron oxide nanoparticles (USPIOs). PEM lipids are coupled with 1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid (DOTA) and subsequently chelated to ⁶⁴Cu. PEMs show a diameter of 140 ± 7 nm and a transversal relaxivity r₂ of 265.0 ± 10.0 (mM × s)^?1, with a r₂/r₁ ratio of 123. Using a murine xenograft model bearing human breast cancer cell line (MDA‐MB‐231), intravenously administered PEMs progressively accumulate in tumors reaching a maximum of 3.5 ± 0.25% ID/g tumor at 20 h post‐injection. Correlation of PET and MRI signals revealed non‐uniform intratumoral distribution of PEMs with focal areas of accumulation at the tumor periphery. These long‐circulating PEMs with high transversal relaxivity and tumor accumulation may allow for detailed interrogation over multiple scales in a clinically relevant setting.     

Optimization by record dynamics

Large dynamical changes in thermalizing glassy systems are triggered by trajectories crossing record sized barriers, a behavior revealing the presence of a hierarchical structure in configuration space. The observation is here turned into a novel local search optimization algorithm dubbed record dynamics optimization, or RDO. RDO uses the Metropolis rule to accept or reject candidate solutions depending on the value of a parameter akin to the temperature and minimizes the cost function of the problem at hand through cycles where its ‘temperature’ is raised and subsequently decreased in order to expediently generate record high (and low) values of the cost function. Below, RDO is introduced and then tested by searching for the ground state of the Edwards–Anderson spin-glass model, in two and three spatial dimensions. A popular and highly efficient optimization algorithm, parallel tempering (PT), is applied to the same problem as a benchmark. RDO and PT turn out to produce solutions of similar quality for similar numerical effort, but RDO is simpler to program and additionally yields geometrical information on the system’s configuration space which is of interest in many applications. In particular, the effectiveness of RDO strongly indicates the presence of the above mentioned hierarchically organized configuration space, with metastable regions indexed by the cost (or energy) of the transition states connecting them.     

Determination of pyrethroids in chicken egg samples: development and validation of a confirmatory analytical method by gas chromatography/mass spectrometry

The aim of this study was to develop and validate an efficient analytical method based on gas chromatography/tandem mass spectrometry (GC/MS/MS) for detection and quantification of six pyrethroids residues (Phenothrin, Permethrin, Cyfluthrin, Cypermethrin, Deltamethrin and Fenvalerate) in chicken eggs. The method was based on a preliminary liquid–liquid extraction of albumen‐free yolk samples, followed by a clean‐up by solid‐phase extraction. GC/MS/MS analyses were carried out in the selected reaction monitoring mode. Validation parameters such as specificity, detection capability, decision limit, precision, recovery, stability and ruggedness were determined, resulting in compliance with Decision 2002/657/EC. No complicated apparatus are required; moreover, low volumes of organic solvents and a nonintensive manual labour are required. These low costs and simple procedure, based on rapid and safe operations, may represent a useful tool in the routine analysis of pyrethroids pesticides, in the place of the currently used conventional techniques.     

Molecularly imprinted polymers by phase inversion technique for the selective recognition of saccharides of biomedical interest in aqueous solutions

The purpose of this work was the preparation and characterization of polymeric membranes for the selective recognition of saccharides using molecular imprinting technology associated with phase inversion. A system able to bind saccharides with high selectivity is particularly important in the pharmaceutical sector, since some of these compounds are constituents of molecules which can exert serious toxic effects even at very low concentrations. Two polymeric matrices were prepared using poly(ethylene‐co‐vinyl alcohol) copolymers, with an ethylene molar content of 32% and 44%, and were imprinted with two different saccharide molecules: maltose and 2‐keto‐3‐deoxy‐d ‐manno‐octulosonate (KDO). Matrices imprinted against maltose and KDO showed an easy template extraction, high binding capability and satisfactory selectivity, particularly for the matrix with an ethylene molar content of 44%. © 2017 Society of Chemical Industry